للمره الثانيه هل من مجيب ... ؟

[خا9لد]

السلام عليكم

بدون اطاله

ابي اكسبيرت
موفنج
8 كلوس لينر
5 كلوس لينر

الاستوب 110
الهدف 155

واقفال الصفقه وعكسها ان عاد للتقاطع قبل الهدف او الاستوب

اربع ساعات
باوند ين

[وضاح عطار]

أهلا بك أخي

أعتقد أن هذا الاكسبيرت موجود فعلا

سأبحث لك عنه

وأرجو من الإخوة الذين لديهم هذا الاكسبيرت أن يرفقوه هنا .

[خا9لد]

تسلم اخوي وضاح تعبتك معاي

[minime]

منقول

Common Setting :
-----------------
StopLoss (default 100)
Set your Stop Loss. Use 0 (zero) if you don't like to use Stop Loss ( not recommended ).

TakeProfit (default 200)
Set your Take Profit. Use 0 (zero) if you like to use open target.


Trailing Stop Setting :
----------------------
ver.6 TrailingStopType (default 1)
Set trailing stop type. 1:will start trailing if profit in pips is greater / same with TrailingStop. 2:will start trailing as soon as trade in profit. (will add other type of trailing stop if suggested, latest suggestion is SafeZone trailing stop post #99 Universal MA Cross EA )

TrailingStop (default 40)
Set the Trailing Stop. Use 0 (zero) if you don't use trailing stop feature.


Moving Average Setting :
------------------------
FastMAPeriod (default 10)
Fast Moving Average Period.

FastMAType (default EMA / 1)
Fast Moving Average Type 0:SMA 1:EMA 2:SMMA 3:LWMA

FastMAPrice (default Close / 0)
Fast Moving Average Applied Price 0:Close 1:Open 2:High 3:Low 4:Median 5:Typical 6:Weighted

ver.7.2 FastMAshift (default 0)
Fast Moving Average Shift

SlowMAPeriod (default 80)
Slow Moving Average Period.

SlowMAType (default EMA / 1)
Slow Moving Average Type 0:SMA 1:EMA 2:SMMA 3:LWMA

SlowMAPrice (default Close / 0)
Slow Moving Average Applied Price 0:Close 1:Open 2:High 3:Low 4:Median 5:Typical 6:Weighted

ver.7.2 FastMAshift (default 0)
Slow Moving Average Shift


Minimum Cross Distance :
------------------------
ver.2 MinCrossDistance (default 0)
Set the pip distance between FastMA and SlowMA to be consider as a valid cross. Use 0 (zero) to disable this filter.

ver.7 MaxLookUp (default 1)
Set number of bar after the cross to keep checking on the entry condition in regards with the minimum distance between FastMA and SlowMA. Need MinCrosDistance > 0 to enable this feature. Use 0 (zero) to disable this feature.


Exit Setting :
-------------
StopAndReverse (default true)
If set to TRUE, will exit any trade and reverse position when signal change.

PureSAR (default false)
If set to TRUE, will use no Stop Loss - Take Profit - and Trailing Stop. This is always in play setting.

ver.7.2 ExitOnCross (default false)
If set to TRUE, will exit any trade if there is an opposite cross without consider any additional filter. So exit purely base on moving average cross.

[خا9لد]

منقول

Common Setting :
-----------------
StopLoss (default 100)
Set your Stop Loss. Use 0 (zero) if you don't like to use Stop Loss ( not recommended ).

TakeProfit (default 200)
Set your Take Profit. Use 0 (zero) if you like to use open target.


Trailing Stop Setting :
----------------------
ver.6 TrailingStopType (default 1)
Set trailing stop type. 1:will start trailing if profit in pips is greater / same with TrailingStop. 2:will start trailing as soon as trade in profit. (will add other type of trailing stop if suggested, latest suggestion is SafeZone trailing stop post #99 Universal MA Cross EA )

TrailingStop (default 40)
Set the Trailing Stop. Use 0 (zero) if you don't use trailing stop feature.


Moving Average Setting :
------------------------
FastMAPeriod (default 10)
Fast Moving Average Period.

FastMAType (default EMA / 1)
Fast Moving Average Type 0:SMA 1:EMA 2:SMMA 3:LWMA

FastMAPrice (default Close / 0)
Fast Moving Average Applied Price 0:Close 1:Open 2:High 3:Low 4:Median 5:Typical 6:Weighted

ver.7.2 FastMAshift (default 0)
Fast Moving Average Shift

SlowMAPeriod (default 80)
Slow Moving Average Period.

SlowMAType (default EMA / 1)
Slow Moving Average Type 0:SMA 1:EMA 2:SMMA 3:LWMA

SlowMAPrice (default Close / 0)
Slow Moving Average Applied Price 0:Close 1:Open 2:High 3:Low 4:Median 5:Typical 6:Weighted

ver.7.2 FastMAshift (default 0)
Slow Moving Average Shift


Minimum Cross Distance :
------------------------
ver.2 MinCrossDistance (default 0)
Set the pip distance between FastMA and SlowMA to be consider as a valid cross. Use 0 (zero) to disable this filter.

ver.7 MaxLookUp (default 1)
Set number of bar after the cross to keep checking on the entry condition in regards with the minimum distance between FastMA and SlowMA. Need MinCrosDistance > 0 to enable this feature. Use 0 (zero) to disable this feature.


Exit Setting :
-------------
StopAndReverse (default true)
If set to TRUE, will exit any trade and reverse position when signal change.

PureSAR (default false)
If set to TRUE, will use no Stop Loss - Take Profit - and Trailing Stop. This is always in play setting.

ver.7.2 ExitOnCross (default false)
If set to TRUE, will exit any trade if there is an opposite cross without consider any additional filter. So exit purely base on moving average cross .

يعطيك العافيه اخوي باجربه بس الجزئ الاخير ما فهمته

[خا9لد]

ما اشتغل معاي

على العموم يعطيك العافيه

[خا9لد]

للرفع

[وضاح عطار]

جرب هذا الاكسبيرت

Moving Average - MQL4 Code Base

[وضاح عطار]

وهذا ايضا

EMA CROSS - MQL4 Code Base

[خا9لد]

يعطيك العافيه اخوي وضاح

ركبتها ولم اجي اعمل باك تست ما يعطيني نتائج

مدري هو مني او من الاكسبيرت

بس عندي اكسبيرتات اخرى يطلع النتائج

على العموم ما قصرت وتعبتك معاي

[وضاح عطار]

يعطيك العافيه اخوي وضاح

ركبتها ولم اجي اعمل باك تست ما يعطيني نتائج

مدري هو مني او من الاكسبيرت

بس عندي اكسبيرتات اخرى يطلع النتائج

على العموم ما قصرت وتعبتك معاي

تأكد أن الهيستوري للفريم المحدد مليء بالمعلومات لفترة كافية .

وتأكد من حجم اللوت المناسب للشركة التي تشغل عليها الاكسبيرت

فبعض الشركات مثلا لا تقبل ميني لوت

جرب وخبرني

[ناصر المنسدح]

م/ وضاح
تكفى شوف موضوعي